Greywater is the used water from showers, bathtubs, bathroom sinks and laundry. On a rural property, reusing it can cut the load on a septic system and the demand on a well or cistern. It is also legally sewage in much of Canada, and the rules on what you may build differ sharply between provinces and states. This guide sets out how greywater is defined in law, the permit routes in Canada and the northern United States, the setbacks and soil depths that apply, how to size a leaching pit or an irrigation area with real numbers, when storage and treatment are allowed, and what treated greywater must meet before it can flush a toilet. Our composting toilet and greywater guide covers simple branched drains, mulch basins and safe soaps; this guide does not repeat them.
What counts as greywater
The legal definition decides which rules apply, so check it first.
- British Columbia: the Sewerage System Regulation defines domestic sewage as human excreta and waterborne waste from food and drink preparation, dishwashing, bathing, showering, general household cleaning and laundry. Greywater is not separated from it. Any system that treats or disperses greywater is a sewerage system under the regulation.
- Ontario: the Building Code treats a greywater leaching pit as a Class 2 sewage system. Kitchen waste may go to a Class 2 pit, though a grease interceptor is recommended, but toilet waste may not.
- Washington: the state's simplest tier allows water from the clothes washer, bathroom hand sink, and bath or shower. Kitchen sink water is not an allowed source.
- Oregon: water from dishwashers, garbage disposals, toilets and cloth diaper washing is excluded from greywater. Kitchen sink water is allowed only after primary treatment such as a grease trap or filter.
Everywhere, water containing hazardous chemicals, such as paint brush rinse water, pesticides or oily rag wash water, must go to a sewage system, not to a greywater system.
Three ways to handle greywater
| Route | What it does | Typical approval |
|---|---|---|
| Disposal | Greywater soaks into the ground in a leaching pit or trench, with no attempt at reuse | Sewage system permit (Ontario Class 2; BC sewerage system filing) |
| Subsurface irrigation | Untreated or lightly filtered greywater is released below mulch or soil around landscape plants | Greywater permit or local approval (Washington Tier 1, Oregon Tier 1); not a separate category in most of Canada |
| Treated indoor reuse | Greywater is filtered, biologically treated and disinfected, then used to flush toilets | Plumbing permit, certified or engineered treatment system, ongoing testing |
Rules in Canada
British Columbia
Because greywater is domestic sewage, a greywater system in BC follows the same process as a septic system. An authorized person, either a registered onsite wastewater practitioner or a qualified professional, must file the plans with the regional health authority before construction, and must give the owner a maintenance plan and a letter of certification within 30 days of completion. Installing a composting toilet does not remove this requirement for the household's remaining wastewater.
Ontario
A Class 2 greywater leaching pit is intended for properties without a pressurized water supply where the daily greywater volume is small, such as a cabin with a hand pump or carried water. The pit must be inspected and approved under the Building Code by the local authority; in the Thunder Bay district, that is the health unit. The main requirements, from the Thunder Bay District Health Unit's guide, are:
- Greywater only; no toilet waste.
- Maximum flow of 1,000 L (264 US gal) per day.
- Design flow of 125 L (33 US gal) per fixture unit without pressurized water, or 200 L (53 US gal) per fixture unit with it.
- Maximum excavation depth of 1.25 m (4 ft).
- Pit bottom at least 0.9 m (3 ft) above the high groundwater table or bedrock.
- At least 600 mm (2 ft) of soil with a percolation time under 50 minutes on all sides and below.
- Sidewall loading no greater than 400 ÷ T litres per day per square metre, where T is the percolation time.
Alberta and the National Plumbing Code
Alberta's information bulletin on reclaimed water systems for a single property, based on the National Plumbing Code of Canada, allows reclaimed water for toilet and urinal flushing and for subsurface irrigation. Other uses need a site-specific alternative solution. Conditions include:
- a plumbing permit;
- backflow protection as required by the code;
- an overflow that discharges to a sanitary sewer or a private sewage system;
- water quality meeting CSA B128.3 Class A or the federal Canadian Guidelines for Domestic Reclaimed Water for Use in Toilet and Urinal Flushing;
- a design sealed by a professional engineer if the treatment system is not certified;
- a monitoring and maintenance plan submitted to a safety codes officer, testing by an accredited laboratory, and records kept on site.
Design and installation of non-potable water systems is covered by CSA B128.1, and their maintenance and field testing by CSA B128.2. Check whether your province has adopted the plumbing code provisions that reference them.
Rules in the northern United States
Washington
Washington's Tier 1 is the simplest permitted irrigation system for a single-family home. Approval is handled by the local health jurisdiction. The rules include:
- no more than 60 US gal (227 L) per day to each irrigation area, and no more than two irrigation areas per home;
- gravity flow only, with no pumps and no storage tanks;
- a clearly labelled, accessible diversion valve that can send all greywater to the sewer or an approved on-site sewage system;
- greywater kept below the surface, with at least 50 mm (2 in) of mulch maintained through the growing season;
- no use during rain or freezing weather, or when anyone in the home is sick, and no ponding;
- edible parts of plants must not contact greywater.
Oregon
Oregon classifies greywater by treatment level and issues permits in tiers.
- Type 1 is untreated or has only primary treatment such as filters or grease traps. It may be used for subsurface irrigation of landscape plants, lawns and some food crops, but not root vegetables or crops where the edible part touches the water.
- Type 2 adds secondary treatment to reach 10 mg/L or less of BOD and of total suspended solids. It may also be used for surface drip irrigation and landscape ponds not intended for human contact.
- Type 3 must be disinfected.
The Tier 1 permit covers Type 1 greywater under 300 US gal (1,136 L) per day for subsurface irrigation, with a $50 application fee and a $40 annual fee that is waived four years out of five if an annual report is filed. Tier 2 covers Type 1 or Type 2 under 1,200 US gal (4,542 L) per day and requires a design plan and an operation and maintenance manual. Toilet flushing requires an off-the-shelf system and a local plumbing permit.
Setbacks and soil depth
The table compares setbacks from the point of discharge in three jurisdictions. Use it to see the range, then confirm the figures that apply to you.
| Feature | Ontario Class 2 pit | Washington Tier 1 irrigation area | Oregon Type 1 |
|---|---|---|---|
| Drilled well | 10 m (33 ft) | 30 m (100 ft) | 30 m (100 ft) |
| Dug well, sand point or spring used for drinking | 15 m (49 ft) | 30 m (100 ft) | 30 m (100 ft) |
| Lake, river or stream | 15 m (49 ft) | 30 m (100 ft) | 15 m (50 ft) |
| Property line | 3 m (10 ft) | Set by rule; check locally | 0.6 m (2 ft) |
| Separation to groundwater | 0.9 m (3 ft) to high groundwater or bedrock | Check locally | 1.2 m (4 ft) during irrigation season |
Oregon reduces its well and spring setbacks to 15 m (50 ft) for Type 2 treated greywater, and to 7.6 m (25 ft) from surface water. Washington's setbacks for tanks and other components, as opposed to the irrigation area, are 15 m (50 ft) from a private well. Ontario's health unit notes that its minimums may need to increase where soil is poor.
Sizing a leaching pit
A leaching pit is a covered, gravel-filled hole with a perforated container in the middle. Greywater flows into the container and soaks out through the gravel into the surrounding soil. Under Ontario's Class 2 rules, its size is set by the daily flow and how fast the soil accepts water through the pit walls.
Daily flow (L) = fixture units × 125 (no pressurized water)
Allowable sidewall loading (L per day per m²) = 400 ÷ T
Sidewall area needed (m²) = daily flow ÷ allowable loading
Worked example: a cabin with carried water
A cabin has no pressure system. Water is pumped by hand and carried. There is a kitchen sink (1.5 fixture units) and a bathroom wash basin (1.5 fixture units). The soil is a sandy loam with a percolation time of 8 minutes.
Daily design flow: 3.0 fixture units × 125 L = 375 L (99 US gal). This is within the 1,000 L limit.
Allowable loading: 400 ÷ 8 = 50 L per day per m².
Sidewall area: 375 ÷ 50 = 7.5 m² (81 sq ft).
Pit shape: the excavation may be no deeper than 1.25 m. Taking an effective wetted depth of 0.9 m, the pit perimeter must be at least 7.5 ÷ 0.9 = 8.3 m. A rectangular pit 1.2 m × 3.0 m (4 ft × 10 ft) has a perimeter of 2 × (1.2 + 3.0) = 8.4 m, which works.
On a silty soil with a percolation time of 30 minutes, the allowable loading falls to 400 ÷ 30 = 13.3 L per day per m², and the same flow needs 375 ÷ 13.3 = 28.1 m² of sidewall. That is a perimeter of 31 m at 0.9 m depth, which is no longer a pit. A trench, a different system or a smaller flow is needed. Confirm with the inspecting authority how it measures sidewall area before you dig.
Construction points
- Support the walls so they cannot collapse, using open-jointed lining so water can still leach.
- Surround the perforated barrel with clean, washed rock or gravel larger than the barrel holes, about 150 mm (6 in) thick on all sides and below. Do not drill holes in the barrel top.
- Fit a tight, strong cover that is removed only for maintenance.
- Mound earth at least 150 mm (6 in) above surrounding ground, grade it so surface water runs away, and grass the final surface.
- Install a screen or grease interceptor ahead of the pit if kitchen water is included, and pump out solids as you would a septic tank.
- In clay, rake smeared clay off the walls and base, and place at least 600 mm (2 ft) of clean sand between the clay and the gravel.
Sizing an irrigation area
Irrigation reuse only makes sense if plants can use the water. The area needed depends on how much water the plants lose to evaporation and transpiration on a typical summer day, called evapotranspiration (ET), and a plant factor that adjusts for the type of planting. Washington's Tier 1 sizing uses a plant factor of 0.60 for trees and shrubs.
Metric: daily water use (L) = ET (mm per day) × plant factor × area (m²)
Imperial: daily water use (US gal) = ET (in per day) × plant factor × area (sq ft) × 0.62
Worked example: matching an irrigation area to the Tier 1 limit
A household sends 227 L (60 US gal) per day to one irrigation area of trees and shrubs. Midsummer ET is 5 mm (0.2 in) per day.
Area needed: 227 ÷ (5 × 0.60) = 227 ÷ 3.0 = 75.7 m².
Imperial check: 60 ÷ (0.2 × 0.60 × 0.62) = 60 ÷ 0.0744 = 806 sq ft, which is 75 m².
That is roughly a bed 7.5 m × 10 m (25 ft × 33 ft) of mulched trees and shrubs. If ET drops to 2 mm per day in spring or fall, the same 227 L would need 227 ÷ (2 × 0.60) = 189 m² to be used fully. When the plants cannot take the water, turn the diversion valve and send it to the septic system.
Spread the flow across the area with several outlets. A single outlet saturates the soil around it while the rest of the bed stays dry.
Surge tanks and storage
Untreated greywater must not be stored. Oregon prohibits storing Type 1 greywater for more than 24 hours, and Washington's Tier 1 allows no storage tank at all. Stored untreated greywater quickly turns septic and smells.
Where storage is permitted, as with Oregon Type 2 systems, the design must include treatment, and the tank must:
- be secured so it cannot tip;
- be sized for peak flow;
- be labelled as non-potable water;
- have an overflow drain connected to an approved sewage system.
A small surge tank that holds a washing machine's discharge and releases it slowly can help a gravity system cope with a large burst of water. Check that your jurisdiction allows one before installing it.
Treated greywater for toilet flushing
Using greywater to flush toilets saves the most potable water, because toilets run all year, unlike irrigation. It is also the most demanding route. The water must be treated, disinfected and monitored, and the plumbing must be kept completely separate from drinking water.
Health Canada's guidelines for domestic reclaimed water used in toilet and urinal flushing set these values:
| Parameter | Median | Maximum |
|---|---|---|
| Five-day biochemical oxygen demand (BOD) | 10 mg/L or less | 20 mg/L or less |
| Total suspended solids (TSS) | 10 mg/L or less | 20 mg/L or less |
| Turbidity | 2 NTU or less | 5 NTU or less |
| E. coli | Not detected | 200 CFU per 100 mL or less |
| Thermotolerant coliforms | Not detected | 200 CFU per 100 mL or less |
| Total chlorine residual | At least 0.5 mg/L | Not set |
The guidelines call for at least five samples tested for all parameters in the first 30 days after start-up. After that, chlorine residual and turbidity or TSS monitoring continue, and E. coli, coliforms and BOD can move to semi-annual or annual testing depending on the jurisdiction.
Worked example: how much water toilet reuse saves
Two people each flush a 6 L (1.6 US gal) toilet four times a day: 2 × 4 × 6 = 48 L per day. Over a year that is 48 × 365 = 17,520 L (4,628 US gal) of water that would otherwise come from the well or cistern.
The same household's showers and bathroom sink produce well over 48 L a day, so greywater supply is not the limit. Treatment, disinfection and testing costs are. For a seasonal cabin, a low-flush toilet or a composting toilet often saves the same water with far less equipment.
Operating a greywater system
Weekly checks
- Check plants for overwatering, yellowing or salt damage. Washington's guidance suggests a weekly check.
- Look for ponding, wet spots, odour or water surfacing anywhere in the irrigation area.
- Clean lint and hair screens and filters.
When to divert
Send greywater to the septic or approved sewage system:
- during rain and whenever the soil is saturated or frozen;
- when anyone in the household is sick;
- when washing diapers or heavily soiled clothes, or using bleach;
- when cleaning with any hazardous product.
Oregon's homeowner guide gives a simple saturation test: dig 150 mm (6 in) down and squeeze a handful of soil. If water drips out, the soil is saturated and cannot take greywater.
Seasonal start-up and shutdown
In most of Canada and the northern states, irrigation reuse runs only from spring thaw to fall freeze-up. Before winter, turn the diversion valve to the sewage system and drain irrigation lines so they cannot freeze and split. In spring, wait until the soil has thawed and drained, check lines and outlets, and then switch back.
Key points
- In BC greywater is domestic sewage and needs an authorized person to file the system; in Ontario a greywater leaching pit is a Class 2 system needing a permit.
- Ontario Class 2 pits are limited to 1,000 L per day, at least 0.9 m above groundwater or bedrock, with sidewall loading no higher than 400 ÷ T.
- Washington Tier 1 allows 60 US gal per day per irrigation area, gravity only, no storage; Oregon Tier 1 allows under 300 US gal per day of Type 1 greywater for subsurface irrigation.
- Setbacks from wells range from 10 m for a drilled well near an Ontario Class 2 pit to 30 m (100 ft) in Washington and Oregon; confirm your own figures.
- Size irrigation from ET and plant factor: 227 L a day at 5 mm ET and a 0.60 plant factor needs about 76 m² of trees and shrubs.
- Never store untreated greywater beyond 24 hours, and never discharge it into frozen or saturated soil.
- Toilet flushing with greywater requires treatment to Health Canada or CSA B128.3 Class A quality, a chlorine residual of at least 0.5 mg/L, backflow protection and regular testing.
This guide is general information. Codes, permits and safety requirements vary by province, state and municipality. Check local rules and use a qualified professional for electrical, gas, chimney and septic work where required.
The Comprehensive Off-Grid Manual
Every off-grid system in one manual, with worked examples, checklists and northern-climate detail.
More guides
Composting Toilets and Greywater Systems
Off-grid toilet options, safe humanure composting and curing, urine use, simple greywater systems, setbacks, cold-climate issues and permits.
Septic Systems: Types, Sizing and Care
Septic tank and leaching bed types, soil and percolation tests, Ontario sizing formulas, clearances, BC and US permit rules, pumping intervals and system care.
Off-Grid Solar Power: How to Size a System
Size an off-grid solar system for Canadian winters: load audit, peak sun hours, array, MPPT, inverter, wiring, fusing, with a full cabin example.