Home › Free guides › Haida Gwaii

Off-Grid Living on Haida Gwaii and the North Coast

Regions  12 min read

Haida Gwaii and BC's North Coast are wet, windy and remote, with mild temperatures on the islands and outer coast and heavy snow in the mainland valleys behind them. The land is also governed by some of the most significant Indigenous title and treaty arrangements in Canada. This guide covers the region's design climate, wind and driving rain, snow loads, solar resource by month, foundations, BC rules for water, septic systems, building and burning, the Haida title agreement and Nisga'a treaty lands, flood, landslide and seismic risk, and practical system choices.

Design climate

The values below are from Table C-2 of the 2018 BC Building Code. Daajing Giids is listed in the code under its former name, Queen Charlotte City.

LocationJanuary design temperature (2.5%)Heating degree-days (below 18 °C)Annual total precipitation1-day rain (1-in-50)
Masset−5 °C (23 °F)3,7001,400 mm (55 in)80 mm (3.1 in)
Daajing Giids−6 °C (21 °F)3,5201,350 mm (53 in)110 mm (4.3 in)
Sandspit−4 °C (25 °F)3,4501,350 mm (53 in)86 mm (3.4 in)
Prince Rupert−13 °C (9 °F)3,9002,900 mm (114 in)160 mm (6.3 in)
Kitimat (townsite)−16 °C (3 °F)3,9002,300 mm (91 in)171 mm (6.7 in)
Bella Coola−14 °C (7 °F)3,5601,700 mm (67 in)140 mm (5.5 in)
Terrace−19 °C (−2 °F)4,1501,150 mm (45 in)120 mm (4.7 in)

Haida Gwaii's design temperatures are as mild as southern Vancouver Island's, but its heating degree-days are higher, because summers are cool and the heating season never really ends. A house near Masset needs about 3,700 ÷ 2,650 = 1.4 times the annual heat of the same house near Victoria, even though its design temperature is only one degree colder. For a house losing 150 W per 1 °C, annual heat demand is 150 × 3,700 × 24 = 13,320 kWh near Masset against 150 × 2,650 × 24 = 9,540 kWh near Victoria. On the mainland, the valleys are much colder: Terrace's design temperature is 14 °C below Masset's.

Wind and driving rain

Haida Gwaii takes the full force of Pacific storms. The code's wind and driving rain values show how exposed it is:

LocationHourly wind pressure (1-in-50)Driving rain wind pressure (1-in-5)
Sandspit0.78 kPa500 Pa
Masset0.61 kPa400 Pa
Daajing Giids0.61 kPa360 Pa
Prince Rupert0.54 kPa240 Pa
Terrace0.36 kPa200 Pa
Victoria (for comparison)0.57 kPa220 Pa

Sandspit's 1-in-50 hourly wind pressure of 0.78 kPa is higher than Tofino's 0.68 kPa on the west coast of Vancouver Island. Its driving rain wind pressure, which measures how hard wind pushes rain against and into walls, is more than twice Victoria's.

Worked example: uplift on a roof

Wind flowing over a roof lowers the pressure above it and lifts it. As a simple illustration, take a reference pressure of 0.78 kPa acting upward on a 6 m × 8 m (19.7 ft × 26.2 ft) roof, 48 m² (517 sq ft). The upward force is 0.78 × 48 = 37 kN, about 3,800 kg (8,400 lb).

A light wood-framed roof weighs far less than that. Real design uplift depends on gust, exposure and pressure coefficients, which are highest at roof edges and corners, but the arithmetic shows why roofs on exposed Haida Gwaii sites need engineered hold-downs from rafters to walls and walls to foundations, and why solar racks need anchors designed for the site.

Driving rain gets into every gap. Use a rainscreen wall with a drained and vented cavity behind the cladding, flashings lapped to shed water outward, and windows installed with sill pans. Doors on the storm side of a building need a covered, recessed entry.

Snow loads

The islands and outer coast have modest snow loads; the mainland valleys have some of the heaviest in the province. Ground snow load Ss and rain-on-snow load Sr, from the 2018 BC Building Code:

  • Masset, Sandspit and Daajing Giids: 1.8 kPa and 0.4 kPa.
  • Prince Rupert: 1.9 kPa and 0.4 kPa.
  • Bella Coola: 4.5 kPa and 0.8 kPa.
  • Terrace: 5.4 kPa and 0.6 kPa.
  • Kitimat townsite: 6.5 kPa and 0.8 kPa.

Over a 48 m² (517 sq ft) roof footprint, Kitimat's 6.5 + 0.8 = 7.3 kPa gives 7.3 × 48 = 350 kN, about 35.7 tonnes, against 2.2 × 48 = 106 kN, about 10.8 tonnes, at Masset. Kitimat's design snow and rain load is more than three times Masset's. A cabin plan that suits Haida Gwaii cannot be used in the Kitimat or Terrace valleys without redesign. The rain-on-snow values of 0.8 kPa at Kitimat and Bella Coola are twice the islands' 0.4 kPa, because winter rain often falls on deep, existing snow.

Solar resource by month

The North Coast is often cloudy, and winter days are short. The table gives calculated day length and noon sun height on the 21st of each month at Masset, 54.0° N. Prince Rupert is within a few minutes of these figures.

Month (21st)Day lengthNoon sun height
January8.2 h16°
February10.1 h25°
March12.1 h36°
April14.4 h48°
May16.3 h56°
June17.1 h59°
July16.4 h56°
August14.4 h48°
September12.2 h36°
October10.0 h24°
November8.1 h16°
December7.4 h13°

These figures do not include cloud. With frequent cloud and rain, solar on the North Coast is mainly a spring and summer resource. Look up monthly photovoltaic potential for your nearest community in Natural Resources Canada's photovoltaic potential and solar resource maps before sizing an array, and expect winter output to be a small fraction of summer output. Rain and wind are the region's reliable winter energy sources: a creek with steady winter flow can run a micro-hydro plant, and an exposed site can run a small wind turbine built for storm conditions.

Worked example: micro-hydro from a small creek

The power available from falling water is flow × head × gravity × efficiency. A creek supplies 5 L (1.3 US gal) per second to a pipeline with 30 m (98 ft) of vertical drop. With an overall efficiency of 50% for pipe losses, turbine and generator:

5 kg/s × 30 m × 9.81 m/s² × 0.5 = 736 W.

Running all day, that is 736 × 24 = 17,700 Wh, about 17.7 kWh a day, far more than most off-grid homes use and available through the wettest, darkest months. Measure the creek's flow at its lowest, usually in late summer, before relying on it. A bucket test works on a small creek: channel the whole flow through a pipe into a 20 L (5.3 US gal) bucket and time it. If the bucket fills in 4 seconds, the flow is 20 ÷ 4 = 5 L per second. Measure head with a surveyor's level, or by sighting along a carpenter's level in steps down the slope, rather than from a map. Diverting water for power needs a water licence in BC, and works in or near a stream may need provincial and federal approvals.

Worked example: why wind sites matter

The power carried by wind through each square metre facing it is 0.5 × air density × wind speed³. With air at 1.225 kg/m³:

  • At 4 m/s (9 mph): 0.5 × 1.225 × 4³ = 39 W/m².
  • At 6 m/s (13 mph): 132 W/m².
  • At 8 m/s (18 mph): 314 W/m².

Doubling the wind speed from 4 to 8 m/s gives eight times the power. A turbine on an open headland or ridge can produce many times what the same turbine makes in a sheltered clearing. Measure wind at the proposed hub height for a season before buying, mount the turbine well above trees and buildings, and choose one rated for the site's storm winds.

Foundations

Frost is shallow on the islands, but soils are often saturated peat, organic muck or clay. Part 9 of the building code (Table 9.12.2.2) requires footings on clay or soils not clearly defined to be at least 1.2 m (3 ft 11 in) below finished ground, and below frost depth for buildings with no heated space. Peat and organic soils are not suitable bearing material at all; footings must go through them to firm soil or rock, or the building must sit on piles. Drainage around and under the building is essential in a climate with this much rain.

BC rules that apply

Water

Groundwater used only for a domestic purpose is exempt from licensing under the Water Sustainability Act. A licence for domestic use of a creek or spring is optional but gives a place in the priority system. Using water to generate power is not a domestic purpose and needs a licence.

Septic systems

Systems discharging to ground and designed for less than 22,700 L a day fall under the Sewerage System Regulation. They must be designed and installed by an authorized person, a registered onsite wastewater practitioner or an authorized professional engineer, who files the system with the health authority and submits a letter of certification within 30 days of completing construction. High water tables and peat soils mean many sites need Type 2 or Type 3 treatment, which needs continuous power.

Building permits and owner-builders

Building permits come from the regional district or municipality where one applies; some rural areas have no building inspection. The Homeowner Protection Act still applies: a new home must be built by a licensed residential builder with home warranty insurance, or by an owner who has passed an exam and holds an Owner Builder Authorization from BC Housing.

Burning

BC's open fire categories apply: campfires no larger than 0.5 m × 0.5 m; Category 2 fires of one or two piles up to 2 m high and 3 m wide; and Category 3 fires above that. Smoke falls under the Open Burning Smoke Control Regulation. Local bylaws may be stricter.

Land status

Haida Gwaii: Haida Aboriginal title

The Gaayhllxid • Gíihlagalgang "Rising Tide" Haida Title Lands Agreement, signed by the Province of British Columbia and the Haida Nation in 2024, formally recognizes Haida Aboriginal title throughout Haida Gwaii. The agreement and its supporting legislation, the Haida Nation Recognition Act, took effect on July 5, 2024. The province states that:

  • recognizing Aboriginal title does not affect anyone's private property, whether residential, commercial or industrial;
  • it does not affect local government jurisdiction or bylaws on Haida Gwaii;
  • there is no change for public infrastructure, programs or services, including airports, ferry terminals, highways, health care and schools.

Over several years, the Council of the Haida Nation and the province will negotiate how Haida and provincial laws work together. During this transition, land and resource decisions continue to be made through existing processes, including the shared decision-making bodies such as the Haida Gwaii Management Council and the Solutions Table. Existing provincial tenures, permits, licences and leases continue, and decisions under provincial jurisdiction are to be made consistent with Haida Aboriginal title.

For anyone buying or building on Haida Gwaii, this means a titled private lot is held as before, subject to local bylaws. Any plan that involves land outside a private lot, such as a dock on the foreshore, a water intake on a creek, a road across public land or a new land tenure, should be raised early with the provincial office and the Council of the Haida Nation, since the arrangements for those lands are being worked out under the agreement.

Nisga'a Lands

The Nisga'a Final Agreement, British Columbia's first modern treaty, took effect on May 11, 2000. It established about 2,000 km² of Nisga'a Lands in the Nass area of the northwest coast, and was the first treaty in BC to provide constitutional certainty for an Indigenous people's right to self-government. Nisga'a Lands are governed by the Nisga'a Lisims Government under the treaty; contact it about any proposed use.

Other First Nations lands

Much of the North Coast and Central Coast is within the territories of other First Nations, with reserve lands set apart for many of them. Reserve lands have their own land rules. Confirm the status of any parcel through the land title office and the First Nation before buying or planning a use.

Before buying land in the region

  1. Confirm the title. Check that the parcel is a titled private lot in the provincial land title system, and read the title for easements, covenants and rights of way.
  2. Check access. Many parcels are reached by water or by resource roads. Confirm legal road access, or moorage authorization if the lot is water-access only.
  3. Ask about local rules. Local government bylaws on zoning, building and burning continue to apply on Haida Gwaii under the title agreement. Ask the regional district or municipality what permits are needed.
  4. Plan water and power uses early. A creek intake, micro-hydro plant or dock involves land and water beyond the lot. On Haida Gwaii, raise these early with the province and the Council of the Haida Nation.
  5. Test the site. Dig test pits for soil and water table, measure creek flow in late summer, and look for signs of past slides or flooding.
  6. Price the logistics. Ferry and barge freight, contractor travel and fuel delivery add a large share to every project.

Floods, landslides and earthquakes

  • Extreme rain: the 1-in-50 one-day rainfall is 160 mm (6.3 in) at Prince Rupert and 171 mm (6.7 in) at Kitimat. Culverts, ditches, roof gutters and site drainage must handle it.
  • Landslides: steep, saturated slopes fail in heavy rain, especially where they have been logged or cut for roads. Avoid building at the foot of steep slopes or on creek fans.
  • Coastal storms: storm surge and waves erode shorelines and flood low ground. Set buildings back and up from the shore, and keep fuel and batteries above storm water levels.
  • Earthquakes: the region is in a high seismic zone. Natural Resources Canada's seismic hazard tool for the 2020 National Building Code gives site values; foundations, bracing and tank anchorage should be designed for them.
  • Windthrow: shallow-rooted trees on wet soil blow down in winter storms, especially at the new edge of a clearing. Fell or top trees that could reach buildings, the array or the turbine, and keep a chainsaw ready to clear the access road.
  • Wildfire: rare in the wettest areas but possible in dry summers, and more likely in the inland valleys. Follow open fire rules and keep fuel clear of buildings.

Practical system choices

  • Power: micro-hydro where a creek allows, wind on exposed sites, solar for spring and summer, and a generator for backup.
  • Heat: a long heating season with mild design temperatures suits a small certified wood stove burning a steady fire. Firewood needs covered storage with open sides, because outdoor wood never dries in winter here.
  • Water: roof catchment works well. A 100 m² (1,076 sq ft) metal roof near Masset, at 80% efficiency, collects 100 × 1,400 × 0.8 = 112,000 L (29,600 US gal) a year, and near Prince Rupert 100 × 2,900 × 0.8 = 232,000 L. Even here, summer can bring weeks of low rain; the water systems guide covers storage sizing.
  • Corrosion: salt-laden wind reaches far inland on Haida Gwaii. Use stainless or hot-dip galvanized fasteners and racks, and sealed enclosures for electrical equipment.
  • Supply: everything arrives by ferry, barge or air, and storms cancel sailings. Keep spare parts for pumps, the charge controller, the inverter and the generator on hand, and a fuel reserve large enough to cover a delayed delivery.
  • Moisture inside: with outdoor air damp most of the year, run bathroom and kitchen fans to the outside and keep the building heated enough to stop mould on cold walls.

Southeast Alaska

Southeast Alaska has the same wet, windy maritime climate. Rules there are set by the State of Alaska and by boroughs and cities. Confirm ownership and permits before using any land.

Key points

  • Haida Gwaii is mild (−4 to −6 °C design) but has 3,450 to 3,700 heating degree-days and the strongest design wind in coastal BC, 0.78 kPa at Sandspit.
  • Mainland valleys carry heavy snow: 5.4 kPa at Terrace and 6.5 kPa at Kitimat townsite, against 1.8 kPa on the islands.
  • Design for driving rain and wind uplift with rainscreen walls and engineered hold-downs.
  • Winter solar is poor; micro-hydro, wind and a generator carry the dark months. Power generation from a creek needs a water licence.
  • Haida Aboriginal title is recognized throughout Haida Gwaii under the 2024 agreement; private property and local bylaws are not affected, and existing tenures continue during the transition.
  • Nisga'a Lands, about 2,000 km², are governed under BC's first modern treaty; confirm land status with the First Nation for any parcel.
  • Plan for extreme rain, landslides, coastal storms and earthquakes.

This guide is general information. Codes, permits and safety requirements vary by province, state and municipality. Check local rules and use a qualified professional for electrical, gas, chimney and septic work where required.

The Comprehensive Off-Grid Manual

Every off-grid system in one manual, with worked examples, checklists and northern-climate detail.

Regions

Off-Grid Living on the Prairies

Prairie design cold, snow and wind loads, frost depth, solar by month, Saskatchewan and Manitoba septic and burning rules, dugouts, floods and systems.

12 min read